I have provided TCP-IP communication using the LWIP library on the F28388D card, but I need to make TCP-IP communication on FreeRTOS and for this I need to integrate the LWIP library into the freertos ...

I am working on a project in which the LP8868X-Q1 is being used. Currently I am trying to simulate the circuit which includes this part, however in the PSpiceTI part library it does not seem to exist.

My customer use TPS65131 for 4V to +- 5.5V application. (power for LCM module with aroung 20mA current spent). It's +5.5V output looks fine, but -5.5V has 1V switching noise.

Is the I2C generating a repeated START condition (I2CMDR.BB = 1 and I2CMDR.STT = 1)? This mode is specifically relevant when the controller is configured as transmitter. In this mode, the I2C ...

I used DRV103H in my design, in layout, power PAD via's are connected to the ground, would it make any effect on functionality of the design? first image is viewed from ground layer. purple color is ...

I want to use DMA with SPI to write in 10 registers, I've an array of 16-bit elements, where each element has (8bits for register address and 8 bits for data to write in this registers). the DMA will ...

Is there a way provided from your side to get a full profiling for every core on the board? (i.e CPU Load, stack measurement...etc.) ...

We are looking for alternative to FAN4803CP2. The PFC/PWM FREQUENCY are 67/134kHz. UCC28516 seems a candidate, but it is at LTB lifecycle. Please help. Unfortunately, none of the 1:2 frequency ratio ...

Hi Team, seeking some inputs for a customer. The inverted input of the IVC is connected to a photodiode, and I am using the 10pF internal capacitor for the integrator. The photodiode is illuminated ...

We are utilizing A15 core of the AM5748 for our multi-threaded application. The application is built on TI Sysbios, and we are using CCS 9.3.0 IDE for development. Our objective is to profile the ...

There is a Haptic application with loading(Coil 6.8 ohms),Input Voltage is 21.4V, Vref is 5V, and ISEN connected to GND. The experiment found that when the input ...

hello. In the meantime, I developed signal processing by reshaping the 4-channel data from the dumped data using rawdatareader.m using the mmwaveStudio program, and proceeded with the processing. But ...