I have provided TCP-IP communication using the LWIP library on the F28388D card, but I need to make TCP-IP communication on FreeRTOS and for this I need to integrate the LWIP library into the freertos ...

My customer use TPS65131 for 4V to +- 5.5V application. (power for LCM module with aroung 20mA current spent). It's +5.5V output looks fine, but -5.5V has 1V switching noise.

I am working on a project in which the LP8868X-Q1 is being used. Currently I am trying to simulate the circuit which includes this part, however in the PSpiceTI part library it does not seem to exist.

Is the I2C generating a repeated START condition (I2CMDR.BB = 1 and I2CMDR.STT = 1)? This mode is specifically relevant when the controller is configured as transmitter. In this mode, the I2C ...

I used DRV103H in my design, in layout, power PAD via's are connected to the ground, would it make any effect on functionality of the design? first image is viewed from ground layer. purple color is ...

Is there a way provided from your side to get a full profiling for every core on the board? (i.e CPU Load, stack measurement...etc.) ...

I want to use DMA with SPI to write in 10 registers, I've an array of 16-bit elements, where each element has (8bits for register address and 8 bits for data to write in this registers). the DMA will ...

I enabled TMU1 and set --fp_mode=relaxed. expf is inlined and eventually calls the IEXP2F32 instruction, but IEXP2F32 causes expf to produce incorrect results on negative input. For example, I ...

I'm trying to get LS7366R iC's register value through SPI however, I have some problems with it and I need some help please cause I couldn't solve these problems for about 3 weeks ... This is the SPI ...

I am creating a fast output interface with the M4F, and I need both PWM and PTO signals. I was thinking about using counter compare for both, until I came across both APIs, both for timers and EPWM.

This is Nojiam from Liton JPN. First, we would like to verfiy your refernce hybrid inverter shown on the link below and modify the codes for our tests so we would like ask you to provide soruce codes ...

I have received TIDA-010938 early version firmware from MSS but unfortunately I am unable to compile it successfully. The compilation error I received is shown on the ...