The circuit working conditions are described as follows: Input normal voltage is 58V;Output Voltage is 125V and maximum output Current is 0.3A. The recommended transformer turns ratio is Np:Ns:Naux=24 ...

I'm using bq34z100evm and EV2300. I recently changed my PC. 1. When using the old PC There was no problem for the communication between bq34z100evm and the PC. PC OS : Windows 10 Pro 64bits 21H2 ...

In our battery we are using the BQ78Z100 HW Version 0x0A together with the Firmware Version v0.0.4. There seems to be newer Hardware Revisions available (0xA1, 0xA2 ...

I'm developing the board which used DRV8245. I have some questions about IPROPI usage and equation. I've read this [How to configure IPROPI and current sensing] but still not sure and need to recheck ...

Michael is absolutely correct with his response; you will observe a net improvement to DC specs with the "NB" device over the "N" device. No other specs were adjusted or improved to the device. This ...

I could not download the THS4131 TINA spice Model to use in the TINA Spice Software tool. Please provide me with this model for simulation. After I logged in and made ...

1) Please specify the maximum leakage current for CMPREF pin considering junction temperature up to 125 °C. 2) Please specify the maximum leakage current into CMPIN pin when the hysteresis current ...

Regarding the conditions for switching to PFM mode of the TPS62A01, the data sheet stated that when the inductor current becomes discontinuous. What is the definition of minimum on time and duty less ...

We procured the TMDXIDDK379D to develop on. It's a bit of a pain that we can't ctrl+F the pdf schematic for nets. Wondering if a searchable PDF could be made available. It would be really helpful. I ...

We are using TMUXHS4212 as MUX for 10/100Mbps SGMII. This is our architecture. In this from processor out and Mux in we are getting the waveform but, in the mux out we are not getting any waveforms.

My customer needs 3.3V output. In original question, Febin-san answered "there should not be a limit". Is it okay that we open VSEL-pin?

In TIDA-010210, the power stage is divided into three modules per phase. The design guide does not explain how to managing the stray inductance of power flow between power devices on different modules ...