I'm using TIDA-01606 as a reference for a three-phase inverter design. What I'd like to know is how did you calculate the required capacitance for the dc-bus (which is shown as a split capacitor in ...

I'm using bq34z100evm and EV2300. I recently changed my PC. 1. When using the old PC There was no problem for the communication between bq34z100evm and the PC. PC OS : Windows 10 Pro 64bits 21H2 ...

In our battery we are using the BQ78Z100 HW Version 0x0A together with the Firmware Version v0.0.4. There seems to be newer Hardware Revisions available (0xA1, 0xA2 ...

Michael is absolutely correct with his response; you will observe a net improvement to DC specs with the "NB" device over the "N" device. No other specs were adjusted or improved to the device. This ...

I am looking to use DS90UB941AS-Q1 in combination with DS90UB948-Q1. If I have a host MCU outputting single channel MIPI DSI, can the Deserializer output dual channel LVDS to the display? Or is a dual ...

I could not download the THS4131 TINA spice Model to use in the TINA Spice Software tool. Please provide me with this model for simulation. After I logged in and made ...

My customer want to compiler UL certification with use C2000. we follow the coverage_test_instruction to coverage data files.

1) Please specify the maximum leakage current for CMPREF pin considering junction temperature up to 125 °C. 2) Please specify the maximum leakage current into CMPIN pin when the hysteresis current ...

Once you are in ITRAP, you can load the bootrom symbol from C2000Ware_x(whatever version you have)/libraries/boot_rom/f28003x/rev0/rom_sources/ccs_files/cpu/Release ...

I am trying to develop an application that has a TPS25751D, 512kb EEPROM, and BQ25713 connected via I2C. The USB PD Application Customization Tool can generate two binary files: "low region binary" ...

We are using TMUXHS4212 as MUX for 10/100Mbps SGMII. This is our architecture. In this from processor out and Mux in we are getting the waveform but, in the mux out we are not getting any waveforms.

Regarding the conditions for switching to PFM mode of the TPS62A01, the data sheet stated that when the inductor current becomes discontinuous. What is the definition of minimum on time and duty less ...