Product added to your wishlist! View wishlist
Sign in to see your saved products on any device
Product removed from your wishlist! View wishlist
Sign in to see your saved products on any device
Something went wrong. Please try again later.
Product is added to compare already. Please refresh the page.
Product is not found in compare. Please refresh the page.
5 Products already added. Please delete existing selection to add this.
Share this product
TrueRC X-AIR 5.8GHz MK II Antenna Pair for HDZERO VRX4 - RHCP
This product ad may change over time
ShareTrueRC X-AIR 5.8GHz MK II Antenna Pair for HDZERO VRX4 - RHCP
ir of TrueRC X-AIR 5.8GHz MK II Antenna (HDZERO VRX4) for the HDZero VRX - Digital HD Receiver Module. Slide on the antennas on the module's rails and screw on the custom knurled SMA connectors to obtain 10dBic gain combined with a healthy flyable beam width of 120deg. Paired with TrueRCs OCP Omni Antennas to yield an ama…
ir of TrueRC X-AIR 5.8GHz MK II Antenna (HDZERO VRX4) for the HDZero VRX - Digital HD Receiver Module. Slide on the antennas on the module's rails and screw on the custom knurled SMA connectors to obtain 10dBic gain combined with a healthy flyable beam width of 120deg. Paired with TrueRCs OCP Omni Antennas to yield an amazing flight experience in a compact and low-profile package! Note: VRX is NOT included.VIDEO: (Insert Video Title here in Bold)FeaturesCircularly PolarizedSector-type beam shape (widest on horizontal)Mount direct on the HDzero module with included slide-on mounts.Compact low-profile design, easy to store and transportHigh 10 dBic for long-range and signal penetrationLarge SWR and axial ratio bandwidth, work even out of the 5.8GHz bandSuper wide 120-degree beam for each antenna combined to 135deg beam widthCustom knurled SMA connectors Low Profile Design, Only 15mm ThickMost compact antennas of this gain level at only 15mm thickness, letting you leave them on at all the time without fear of breaking them. The included slide-on mounts fit natively on the HDzero VRX4 module for easy installation.Custom Made SMA Connectors, Fit the HDzeroAs with all other components of X-AIR antennas, the custom SMA connector is made to the highest standards to fit your HDzero module perfectly and make sure every bit of RF power is transferred from the X-AIR. A knurled finish provide easy tightening and a quality look exclusive to TrueRC.Pair With TrueRCs OCP Omni AntennasPaired with OCP omni-directional antennas for a complete antenna system!SpecificationsBandwidth: 5.1GHz-6.7GHzGain: 9.5-10.5 dBicPolarization: RHCP or LHCPBeam-width*: 120degBeam-width @-3dB**: 68deg.Connector: SMA maleDimension: 32 x 32 x 15mmInclude mounts for installation onto the HDzero module. IMPORTANT NOTES*Coverage of individual antenna where reception is at least equivalent to an omni.**Coverage of individual antenna where at least 70% of the max range is obtained.Recommended (Not Included) (Insert recommended products here. Example: "Battery: Lumenier 10000mAh 6s 25c Lipo Battery")Links (Insert links such as manuals, firmware, etc)Includes2x TrueRC X-AIR 5.8GHz MK II Antenna Pair for HDZERO VRX4 2x Side MountsFeatured VideosADD VIDEO TITLE HERE IN BOLD CAPSADD VIDEO TITLE HERE IN BOLD CAPS
Description
ir of TrueRC X-AIR 5.8GHz MK II Antenna (HDZERO VRX4) for the HDZero VRX - Digital HD Receiver Module. Slide on the antennas on the module's rails and screw on the custom knurled SMA connectors to obtain 10dBic gain combined with a healthy flyable beam width of 120deg. Paired with TrueRCs OCP Omni Antennas to yield an amazing flight experience in a compact and low-profile package! Note: VRX is NOT included.VIDEO: (Insert Video Title here in Bold)FeaturesCircularly PolarizedSector-type beam shape (widest on horizontal)Mount direct on the HDzero module with included slide-on mounts.Compact low-profile design, easy to store and transportHigh 10 dBic for long-range and signal penetrationLarge SWR and axial ratio bandwidth, work even out of the 5.8GHz bandSuper wide 120-degree beam for each antenna combined to 135deg beam widthCustom knurled SMA connectors Low Profile Design, Only 15mm ThickMost compact antennas of this gain level at only 15mm thickness, letting you leave them on at all the time without fear of breaking them. The included slide-on mounts fit natively on the HDzero VRX4 module for easy installation.Custom Made SMA Connectors, Fit the HDzeroAs with all other components of X-AIR antennas, the custom SMA connector is made to the highest standards to fit your HDzero module perfectly and make sure every bit of RF power is transferred from the X-AIR. A knurled finish provide easy tightening and a quality look exclusive to TrueRC.Pair With TrueRCs OCP Omni AntennasPaired with OCP omni-directional antennas for a complete antenna system!SpecificationsBandwidth: 5.1GHz-6.7GHzGain: 9.5-10.5 dBicPolarization: RHCP or LHCPBeam-width*: 120degBeam-width @-3dB**: 68deg.Connector: SMA maleDimension: 32 x 32 x 15mmInclude mounts for installation onto the HDzero module. IMPORTANT NOTES*Coverage of individual antenna where reception is at least equivalent to an omni.**Coverage of individual antenna where at least 70% of the max range is obtained.Recommended (Not Included) (Insert recommended products here. Example: "Battery: Lumenier 10000mAh 6s 25c Lipo Battery")Links (Insert links such as manuals, firmware, etc)Includes2x TrueRC X-AIR 5.8GHz MK II Antenna Pair for HDZERO VRX4 2x Side MountsFeatured VideosADD VIDEO TITLE HERE IN BOLD CAPSADD VIDEO TITLE HERE IN BOLD CAPS