Product added to your wishlist! View wishlist
Sign in to see your saved products on any device
Product removed from your wishlist! View wishlist
Sign in to see your saved products on any device
Something went wrong. Please try again later.
Product is added to compare already. Please refresh the page.
Product is not found in compare. Please refresh the page.
5 Products already added. Please delete existing selection to add this.
Share this product
Iota dls-30 30 amp converter/charger
This product ad may change over time
ShareIota dls-30 30 amp converter/charger
Users say:
This power converter is easy to install and works well. It has different modules for different types of batteries and a charge profile that works very well. It is also quiet and has a pre-slotted base for screws to fasten it down.
Manufacturer part number: dls-30power converter; dls series; converts 108 to 132 volt ac to 13.6 volt dc; 400 continuous watts; 30 amps continuous output; 80 percent efficiency; with short circuit/ reverse polarity/ over load/ thermal protection; 9.7 inch length x 6.7 inch width x 3.4 inch height; with 36 inch length power cord; compatible with iot…
Manufacturer part number: dls-30power converter; dls series; converts 108 to 132 volt ac to 13.6 volt dc; 400 continuous watts; 30 amps continuous output; 80 percent efficiency; with short circuit/ reverse polarity/ over load/ thermal protection; 9.7 inch length x 6.7 inch width x 3.4 inch height; with 36 inch length power cord; compatible with iota iq4 charge controllerproduct infothe dls battery charger/power converter from iota engineering converts nominal ac to dc voltage. as a power supply, its tightly controlled regulation allows the user to operate any appropriate nominal dc load up to the converter's rated output current. as a battery charger, the dls will maintain the battery, delivering its full-rated current when the battery capacity falls sufficiently low. the voltage is set to deliver its maximum current for the necessary period of time that minimizes undue stress to the battery caused by heating of its cells. this helps to ensure the longest possible life of the battery. over time, as the battery nears its full capacity, the converter will float-charge the battery to prevent self-discharge of its cells.catalog page: ntp - 11-17converts: 108-132 volt ac to 13.6 volt dccontinuous output power: 400 wattpeak output power: 400 wattampere rating: 30 ampnumber of outlets: 2efficiency: 80 percentlength: 9.7 inchwidth: 6.7 inchheight: 3.4 inchremote on/off capable: nowith usb port: nowith volt/watt meter: nowith short circuit: yeswith reverse battery protection: yeswith thermal protection: yeswith battery cables: nowith built-in charger: yeswith fuse: yesfeatures switch-mode technology tight line-load regulation quickly and efficiently charges batteries designed to withstand low transient ac line voltage current limit and thermal or overload protection lower operating temperature quiet fan operation external reverse polarity fuse protection from incorrect battery connection high and normal-stage charging jack limited 2 year warranty Model: NTP-I6KDLS30
Review summary
AI-generated content
This power converter is easy to install and works well. It has different modules for different types of batteries and a charge profile that works very well. It is also quiet and has a pre-slotted base for screws to fasten it down.
Pros
- Easy to install
- Works well
- Various modules for different batteries
- Quiet cooling fan
- Good battery life
Cons
- Smaller size than previous model
Read original reviews
Description
Manufacturer part number: dls-30power converter; dls series; converts 108 to 132 volt ac to 13.6 volt dc; 400 continuous watts; 30 amps continuous output; 80 percent efficiency; with short circuit/ reverse polarity/ over load/ thermal protection; 9.7 inch length x 6.7 inch width x 3.4 inch height; with 36 inch length power cord; compatible with iota iq4 charge controllerproduct infothe dls battery charger/power converter from iota engineering converts nominal ac to dc voltage. as a power supply, its tightly controlled regulation allows the user to operate any appropriate nominal dc load up to the converter's rated output current. as a battery charger, the dls will maintain the battery, delivering its full-rated current when the battery capacity falls sufficiently low. the voltage is set to deliver its maximum current for the necessary period of time that minimizes undue stress to the battery caused by heating of its cells. this helps to ensure the longest possible life of the battery. over time, as the battery nears its full capacity, the converter will float-charge the battery to prevent self-discharge of its cells.catalog page: ntp - 11-17converts: 108-132 volt ac to 13.6 volt dccontinuous output power: 400 wattpeak output power: 400 wattampere rating: 30 ampnumber of outlets: 2efficiency: 80 percentlength: 9.7 inchwidth: 6.7 inchheight: 3.4 inchremote on/off capable: nowith usb port: nowith volt/watt meter: nowith short circuit: yeswith reverse battery protection: yeswith thermal protection: yeswith battery cables: nowith built-in charger: yeswith fuse: yesfeatures switch-mode technology tight line-load regulation quickly and efficiently charges batteries designed to withstand low transient ac line voltage current limit and thermal or overload protection lower operating temperature quiet fan operation external reverse polarity fuse protection from incorrect battery connection high and normal-stage charging jack limited 2 year warranty Model: NTP-I6KDLS30