Product added to your wishlist! View wishlist
Sign in to see your saved products on any device
Product removed from your wishlist! View wishlist
Sign in to see your saved products on any device
Something went wrong. Please try again later.
Product is added to compare already. Please refresh the page.
Product is not found in compare. Please refresh the page.
5 Products already added. Please delete existing selection to add this.
Share
CONFAST 3/16" x 2-1/4" Concrete Screws 410 Stainless Steel Phillips Flat Countersunk with Concrete Drill Bit for Anchoring to Masonry, Block or
See more belowSorry, We couldn't find this product
Description
BIT INCLUDED IN EACH BOX-Proper bit equals improved holding values and reduced cost HEX HEAD--Can be driven with Hex Driver SELF-TAPPING-Taps threads directly into masonry and requires no other anchor DIAMOND POINT-Easier to drive the screw to save time Applications The anchor is made from 410 Stainless Steel, and is Silver Climaseal Coated. This anchor is designed for use in Concrete, Block, and Brick. Environment The anchor is designed for use in a Moist environment. Head Style The anchor is a Flat Countersunk Phillips head and is designed to prevent the head from protruding above the surface of the item being attached. Hole Diameter/Bit Diameter The anchor requires a 5/32" hole to be drilled in the base material (Concrete, Block, and Brick). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill. Driver Required A #2 phillips bit is required for driving the anchor into the base material. Diameter of Anchor The diameter of the anchor is 3/16". Length Anchor The length of the anchor is 2-1/4" Thread Length The length of the threads on the anchor is 2-1/4" in length. Minimum Embedment The minimum anchor embedment into the concrete is 1". Therefore, the anchor must be installed so that a minimum of 1" of the anchor is embedded into the concrete. Maximum Fixture Thickness The maximum fixture thickness or the maximum thickness of the material being fastened for a anchor is 1/4". This will ensure that the minimum embedment of 1" will be met. Fixture Hole Diameter The hole in the fixture or material being fastened must be larger than the designated diameter of the anchor. The 3/16" diameter anchor requires the hole in the fixture to be 1/4". Spacing between Anchors Each anchor must be spaced a minimum distance of 4" from each other when measured center to center. Edge Distance It is very important not to install the anchor any closer than 3" from an unsupported edge of the concrete.
Specifications
Finish | Stainless Steel |
Drive Type | Phillips |
Type | Self-tapping-taps |
Asin: | B09hk37m5p |
Manufacturer: | Confast |
Country Of Origin: | China |
Date First Available: | April 27, 2017 |
Material | Stainless Steel |
Package Dimensions: | 4.45 X 3.15 X 2.24 Inches; 13.44 Ounces |
Head Style | Phillips Flat |
Brand | Confast |