Product added to your wishlist! View wishlist
Sign in to see your saved products on any device
Product removed from your wishlist! View wishlist
Sign in to see your saved products on any device
Something went wrong. Please try again later.
Product is added to compare already. Please refresh the page.
Product is not found in compare. Please refresh the page.
5 Products already added. Please delete existing selection to add this.
Share this product
Magnetic Shielding Film MCF5 3 Linear Feet
This product ad may change over time
ShareMagnetic Shielding Film MCF5 3 Linear Feet
Length 3 feet ; Width: 1.96 inch Attenuation LF magnetic field: 30 dB (97 %) ; Attenuation HF: 40 dB at 1 GHz Weight: 180 g/m²; Material thickness: 0.02 mm; Color: Silver Permeability: µ 4 = 25,000; µ max. = 100,000; Saturation polarization: 0.55 T Composition: Co69, Fe4, Mo4, Nb1, Si16, B7 MCF5 is a low cost magnetic shielding film made fro…
Length 3 feet ; Width: 1.96 inch Attenuation LF magnetic field: 30 dB (97 %) ; Attenuation HF: 40 dB at 1 GHz Weight: 180 g/m²; Material thickness: 0.02 mm; Color: Silver Permeability: µ 4 = 25,000; µ max. = 100,000; Saturation polarization: 0.55 T Composition: Co69, Fe4, Mo4, Nb1, Si16, B7 MCF5 is a low cost magnetic shielding film made from an amorphous cobalt alloy for shielding of low-frequency alternating magnetic fields. It also shields low-frequency electric alternating fields (LF) and high-frequency fields (HF). Because MCF5 has a width of only 5 cm, its recommended for shielding smaller areas, e.g. in electronic applications or for cables. In comparison with MUMETALL our MCF5 has many advantages: MUMETALL is soft and sensitive, on bending, to shocks and on processing it looses the attenuation very fast. MCF5 stays flexible but hard even at small bending radii. The attenuation remains constant even at high mechanical stress. MCF5 can easily be cut with scissors. Processing Warning: The cutting edges are sharp as a knife! Best use our plastic scraper FVR10 to press it on the adhesive tapes or into the glue, this is the safe way to keep your fingers! There is no self adhesive version available. To bond this product use a double sided adhesive tape e.g. Carpet adhesive tape with 50 mm width or a wider double-sided adhesive tape. Otherwise a commercial surface contact adhesive can be used (e.g. UHU, PATTEX). Grounding Due to the conductive surface this material can be contacted and grounded easy to shield low frequency (LF) electric fields.
Description
Length 3 feet ; Width: 1.96 inch Attenuation LF magnetic field: 30 dB (97 %) ; Attenuation HF: 40 dB at 1 GHz Weight: 180 g/m²; Material thickness: 0.02 mm; Color: Silver Permeability: µ 4 = 25,000; µ max. = 100,000; Saturation polarization: 0.55 T Composition: Co69, Fe4, Mo4, Nb1, Si16, B7 MCF5 is a low cost magnetic shielding film made from an amorphous cobalt alloy for shielding of low-frequency alternating magnetic fields. It also shields low-frequency electric alternating fields (LF) and high-frequency fields (HF). Because MCF5 has a width of only 5 cm, its recommended for shielding smaller areas, e.g. in electronic applications or for cables. In comparison with MUMETALL our MCF5 has many advantages: MUMETALL is soft and sensitive, on bending, to shocks and on processing it looses the attenuation very fast. MCF5 stays flexible but hard even at small bending radii. The attenuation remains constant even at high mechanical stress. MCF5 can easily be cut with scissors. Processing Warning: The cutting edges are sharp as a knife! Best use our plastic scraper FVR10 to press it on the adhesive tapes or into the glue, this is the safe way to keep your fingers! There is no self adhesive version available. To bond this product use a double sided adhesive tape e.g. Carpet adhesive tape with 50 mm width or a wider double-sided adhesive tape. Otherwise a commercial surface contact adhesive can be used (e.g. UHU, PATTEX). Grounding Due to the conductive surface this material can be contacted and grounded easy to shield low frequency (LF) electric fields.