Your wishlist is now on collections - Saved Products
Something went wrong. Please try again later.
Product is added to compare already. Please refresh the page.
Product is not found in compare. Please refresh the page.
5 Products already added. Please delete existing selection to add this.
Share this product
HANGKAI 2 Stroke 3.6HP Heavy Duty Outboard Motor Boat Engine with Water Cooling System
This product ad may change over time
ShareHANGKAI 2 Stroke 3.6HP Heavy Duty Outboard Motor Boat Engine with Water Cooling System
Fast & Powerful: A 2-stroke engine with a maximum output of 2.6kW and 3.6hp, and a maximum speed of 5500rpm, provides you with unparalleled speed. The streamlined design of a 6.7'' three-blade propeller can reduce water resistance and provide stronger power during operation. Easy to Operate: The throttle lever directly controls accel…
Fast & Powerful: A 2-stroke engine with a maximum output of 2.6kW and 3.6hp, and a maximum speed of 5500rpm, provides you with unparalleled speed. The streamlined design of a 6.7'' three-blade propeller can reduce water resistance and provide stronger power during operation. Easy to Operate: The throttle lever directly controls acceleration and steering. The step-less speed regulation allows you to easily adjust the running speed, combined with the clutch, bringing you a more comfortable and convenient user experience. Lightweight & Fuel-efficient: As an outboard motor, it is relatively small(35.4*15*7.5in) and lightweight(21.4lbs), making it very suitable for small ships and people who frequently navigate short distances. An efficient carburetor burns fuel more fully, with a fuel consumption rate of about 0.3 gal/h not only saving fuel but also reducing expenses. NOTES: Please start the motor in the water. If the motor stops circulating water, please stop using it immediately and check the impeller of the water pump to see if the water outlet is blocked. Please note that this product should use a mixture of two-stroke engine oil and 92 # unleaded gasoline. The running-in period of the new machine is 10 hours, during which the fuel ratio is 25L (6.6 gal) of gasoline to 1L (0.26 gal) of engine oil. After 10 hours, the ratio is 50 liters (13.21 gallons) Suitable for rubber boats, inflatable boats, fishing boats, sailboats, yachts, canoes, kayaks, rubber boats, aluminum alloy boats, etc. with a stern height of 16.53 inches or less, assisting aquaculture, water transportation, net fishing, luring, outboard backup, outings, and river cleaning/maintenance. Notice: (1).Please add gear oil to the gears before use the motor and replace gear oil after the run-in period(10 hours).(if you do not know how to handle this,please contact us) .our outboard motor doesn't with oil of gear,please prepare it by yourself .Keep in mind that you must add oil on the gear before use !!! (2).Cylinder Scoring is a serious damage,which caused by improper use and will cost you a lot of money to repair the motor. Please Note: There are two pull starter included in the parcel(one is the machine, another one for spare) We don't supply wearing parts (pull starter)for free. If you want buy one please click: Short Shaft:40cm Description: Overall length:92cm /36inch Overall widteh:36.5cm/14.3inch Overall height:22cm/8.7inch Transom height:42cm/16.5 Full throttle perating range:4000-5000r/min Maximum output:2.5kw(3.5HP) Speed:10km/h Type:2-stroke Ignition system: CDI system Starting system: Manual start Staring carburetion system: Choke start Propeller mark:7-1/45-A(inch) The engine and the propeller ratio:2:1 Recommended fuel: Regular unleaded Fuel to oil ratio: 35:1 (Please be suject to this version, and disregard the manual about this point) Gear ratio: 27/13 Maximum speed: 10 km / h Built-in fuel tank: 1.3L Fuel consumption per hour: 1.5L Announcements After in the sea water or turbid water cruising 1.Use the fresh water cleaning the outboard motor 2.With the moderate velocity circulating the engine,cool off the water chanel with fresh water. 3.Before completely running out cooling water,don't put the outboard motor outside. Otherwise the water cam pass the exhaust port to enter the air cylinder, from that will cause the engine breakdown. 4.The engine should deposit in
Description
Fast & Powerful: A 2-stroke engine with a maximum output of 2.6kW and 3.6hp, and a maximum speed of 5500rpm, provides you with unparalleled speed. The streamlined design of a 6.7'' three-blade propeller can reduce water resistance and provide stronger power during operation. Easy to Operate: The throttle lever directly controls acceleration and steering. The step-less speed regulation allows you to easily adjust the running speed, combined with the clutch, bringing you a more comfortable and convenient user experience. Lightweight & Fuel-efficient: As an outboard motor, it is relatively small(35.4*15*7.5in) and lightweight(21.4lbs), making it very suitable for small ships and people who frequently navigate short distances. An efficient carburetor burns fuel more fully, with a fuel consumption rate of about 0.3 gal/h not only saving fuel but also reducing expenses. NOTES: Please start the motor in the water. If the motor stops circulating water, please stop using it immediately and check the impeller of the water pump to see if the water outlet is blocked. Please note that this product should use a mixture of two-stroke engine oil and 92 # unleaded gasoline. The running-in period of the new machine is 10 hours, during which the fuel ratio is 25L (6.6 gal) of gasoline to 1L (0.26 gal) of engine oil. After 10 hours, the ratio is 50 liters (13.21 gallons) Suitable for rubber boats, inflatable boats, fishing boats, sailboats, yachts, canoes, kayaks, rubber boats, aluminum alloy boats, etc. with a stern height of 16.53 inches or less, assisting aquaculture, water transportation, net fishing, luring, outboard backup, outings, and river cleaning/maintenance. Notice: (1).Please add gear oil to the gears before use the motor and replace gear oil after the run-in period(10 hours).(if you do not know how to handle this,please contact us) .our outboard motor doesn't with oil of gear,please prepare it by yourself .Keep in mind that you must add oil on the gear before use !!! (2).Cylinder Scoring is a serious damage,which caused by improper use and will cost you a lot of money to repair the motor. Please Note: There are two pull starter included in the parcel(one is the machine, another one for spare) We don't supply wearing parts (pull starter)for free. If you want buy one please click: Short Shaft:40cm Description: Overall length:92cm /36inch Overall widteh:36.5cm/14.3inch Overall height:22cm/8.7inch Transom height:42cm/16.5 Full throttle perating range:4000-5000r/min Maximum output:2.5kw(3.5HP) Speed:10km/h Type:2-stroke Ignition system: CDI system Starting system: Manual start Staring carburetion system: Choke start Propeller mark:7-1/45-A(inch) The engine and the propeller ratio:2:1 Recommended fuel: Regular unleaded Fuel to oil ratio: 35:1 (Please be suject to this version, and disregard the manual about this point) Gear ratio: 27/13 Maximum speed: 10 km / h Built-in fuel tank: 1.3L Fuel consumption per hour: 1.5L Announcements After in the sea water or turbid water cruising 1.Use the fresh water cleaning the outboard motor 2.With the moderate velocity circulating the engine,cool off the water chanel with fresh water. 3.Before completely running out cooling water,don't put the outboard motor outside. Otherwise the water cam pass the exhaust port to enter the air cylinder, from that will cause the engine breakdown. 4.The engine should deposit in