Share this product

Danforth Fluke Anchor Galvanized 94015

This product ad may change over time

Share

Danforth Fluke Anchor Galvanized 94015

Users say:

This product is highly recommended for its excellent performance in a variety of conditions. It is suitable for a variety of sizes and is delivered quickly. It is also recommended to use at least 3' of chain and a good quality 3-strand line for the proper digging angle.

Standard Galvanized Danforth Fluke AnchorDanforth Anchors are the world's most trusted marine anchors, used by boaters on a variety of crafts. This Danforth fluke anchor has the traditional, superior holding power that has always been associated with Danforth Standard Anchors. The Danforth fluke anchor design features two large triangular fluk…

New content will be added above the current area of focus upon selection

Standard Galvanized Danforth Fluke AnchorDanforth Anchors are the world's most trusted marine anchors, used by boaters on a variety of crafts. This Danforth fluke anchor has the traditional, superior holding power that has always been associated with Danforth Standard Anchors. The Danforth fluke anchor design features two large triangular flukes attached to the stock. This design allows the flukes to orient toward the seabed at a 32 degree angle for maximum holding capabilities in common sea bottoms such as hard sand.Each Danforth anchor for sale is carefully crafted within the United States by Tie Down in their continued effort to fabricate at the highest quality possible. Tie Down utilizes high tensile 4130 steel for increased strength for their anchors. A hot dipped galvanized finish ensures long lasting protection.Danforth Anchors are warranted to be free from manufacturing and material defects for the life of the product. This manufacturer's warranty applies for the lifetime of the product under normal use and service. You'll always find a range of high-quality Danforth anchors for sale at Wholesale Marine.Features: Exceptionally strong stainless steel shank; Thick and wide steel flukes; Galvanized coating is hot-dipped for superior strength; Danforth Anchor Sizes & Specifications:Every Danforth anchor for sale has been manufactured with four main components - the crown (1), the stock (2), the flukes (3), and the shank (4). Refer to the diagram below. Boat size recommendations provided below are based on normal wind conditions, average currents, and a minimum 5:1 scope ratio. Part # Weight Holding Power Boat Size Chain Size Anchor Height (4) Stock Width (2) Fluke Height (3) 94012 9 lbs. 600 lbs. 17 to 27 ft. 3' - 3/16" 24.00" 18.25" 12.00" 94013 14 lbs. 920 lbs. 27 to 31 ft. 4' - 1/4" 28.25" 21.50" 14.25" 94014 16 lbs. 1300 lbs. 31 to 36 ft. 5' - 5/16" 31.75" 24.00" 16.50" 94015 25 lbs. 1600 lbs. 36 to 40 ft. 5' - 5/16" 35.00 26.75" 19.00"

See more below

w

wholesalemarine

$157.99

Visit site

Review summary

AI-generated content

This product is highly recommended for its excellent performance in a variety of conditions. It is suitable for a variety of sizes and is delivered quickly. It is also recommended to use at least 3' of chain and a good quality 3-strand line for the proper digging angle.

Pros

Holds well in various conditions
Works well in sandy/muddy bottoms
Genuine Danforth design
Good for multiple boats

Cons

Bent after first use
Spikes need more separation

Read original reviews

Description

Standard Galvanized Danforth Fluke AnchorDanforth Anchors are the world's most trusted marine anchors, used by boaters on a variety of crafts. This Danforth fluke anchor has the traditional, superior holding power that has always been associated with Danforth Standard Anchors. The Danforth fluke anchor design features two large triangular flukes attached to the stock. This design allows the flukes to orient toward the seabed at a 32 degree angle for maximum holding capabilities in common sea bottoms such as hard sand.Each Danforth anchor for sale is carefully crafted within the United States by Tie Down in their continued effort to fabricate at the highest quality possible. Tie Down utilizes high tensile 4130 steel for increased strength for their anchors. A hot dipped galvanized finish ensures long lasting protection.Danforth Anchors are warranted to be free from manufacturing and material defects for the life of the product. This manufacturer's warranty applies for the lifetime of the product under normal use and service. You'll always find a range of high-quality Danforth anchors for sale at Wholesale Marine.Features: Exceptionally strong stainless steel shank; Thick and wide steel flukes; Galvanized coating is hot-dipped for superior strength; Danforth Anchor Sizes & Specifications:Every Danforth anchor for sale has been manufactured with four main components - the crown (1), the stock (2), the flukes (3), and the shank (4). Refer to the diagram below. Boat size recommendations provided below are based on normal wind conditions, average currents, and a minimum 5:1 scope ratio. Part # Weight Holding Power Boat Size Chain Size Anchor Height (4) Stock Width (2) Fluke Height (3) 94012 9 lbs. 600 lbs. 17 to 27 ft. 3' - 3/16" 24.00" 18.25" 12.00" 94013 14 lbs. 920 lbs. 27 to 31 ft. 4' - 1/4" 28.25" 21.50" 14.25" 94014 16 lbs. 1300 lbs. 31 to 36 ft. 5' - 5/16" 31.75" 24.00" 16.50" 94015 25 lbs. 1600 lbs. 36 to 40 ft. 5' - 5/16" 35.00 26.75" 19.00"

Specifications

Brand	Danforth
Chain Size	5' - 5/16"
Color	Galvanized
Dimensions	35.00" x 26.75" x 19.00"
Features	High strength stainless steel shank; Strong and wide steel flukes; Hot dipped galvanized coating
Finish	Hot dipped galvanized
Fluke Angle	32 degree
Height	35.00"
Holding Power	1600 lbs.
Material	High tensile 4130 steel
Shape	Fluke anchor design with two large triangular flukes attached to the stock
Size	25 lbs.
Style	Standard Galvanized Danforth Fluke Anchor
Type	Boat anchor
Warranty	Lifetime warranty from manufacturing and material defects under normal use and service.
Weight	25 lbs.