Share this product

Ortofon 2M Black Verso Moving Magnet Phono Cartridge - 2M Black Verso

This product ad may change over time

Share

Ortofon 2M Black Verso Moving Magnet Phono Cartridge - 2M Black Verso

2M Black - True to the grooveThe 2M Black is the flagship of the 2M series and it lives up to this with flying colors. The Shibata diamond gives it contact with the groove like nothing else. You can hear every little detail in the music from every part of the spectrum. Just the way the artist wanted you to. For those who want to sense the presence of t…

New content will be added above the current area of focus upon selection

2M Black - True to the grooveThe 2M Black is the flagship of the 2M series and it lives up to this with flying colors. The Shibata diamond gives it contact with the groove like nothing else. You can hear every little detail in the music from every part of the spectrum. Just the way the artist wanted you to. For those who want to sense the presence of the artist in the room when they listen to their records.2M Black Features: The 2M Black is graced with a Shibata diamond which slim, highly polished profile allows an exceedingly wide contact area to the groove walls and ensures notably detailed reproduction throughout the spectrum, including even the most high frequency groove information. The 2M Black uses a special upgraded engine, featuring split pole pins with a silver plated copper wire.; Ortofon has optimized the design for ease of mounting the cartridge, and the weight and size to fit the most common turntables on the market today. The 2M Series provides excellent compatibility when used in an assortment of playback systems and with a wide variety of phono preamps.; The 2M Black Verso model is an alternative product for bottom mount headshellsHow to replace M2,0 mm screws on 2M Black Verso: 1. Remove the stylus with the stylus protection guard from the cartridge body to avoid any damage to the diamond.; 2. Using Torx 8 key, unscrew the black screw from the Verso top plate.; 3. Remove the top plate from the cartridge body by pulling the screws off.; 4. Remove the two countersunk screws from the top plate.; 5. Insert the two M2,0 mm screws in the top plate.; 6. Mount the top plate on the cartridge body. Hold the top plate with screw-threads hanging down and turn the cartridge body 180 degrees. Mount from above.; 7. Mount the black screw in the top plate and tighten with appropriate force.; 8. Mount the cartridge on the tonearm using the enclosed tool.; 9. Mount the stylus with the stylus protection guard on the cartridge body.;

See more below

A

Audio Advice

$855.00

Visit site

Description

2M Black - True to the grooveThe 2M Black is the flagship of the 2M series and it lives up to this with flying colors. The Shibata diamond gives it contact with the groove like nothing else. You can hear every little detail in the music from every part of the spectrum. Just the way the artist wanted you to. For those who want to sense the presence of the artist in the room when they listen to their records.2M Black Features: The 2M Black is graced with a Shibata diamond which slim, highly polished profile allows an exceedingly wide contact area to the groove walls and ensures notably detailed reproduction throughout the spectrum, including even the most high frequency groove information. The 2M Black uses a special upgraded engine, featuring split pole pins with a silver plated copper wire.; Ortofon has optimized the design for ease of mounting the cartridge, and the weight and size to fit the most common turntables on the market today. The 2M Series provides excellent compatibility when used in an assortment of playback systems and with a wide variety of phono preamps.; The 2M Black Verso model is an alternative product for bottom mount headshellsHow to replace M2,0 mm screws on 2M Black Verso: 1. Remove the stylus with the stylus protection guard from the cartridge body to avoid any damage to the diamond.; 2. Using Torx 8 key, unscrew the black screw from the Verso top plate.; 3. Remove the top plate from the cartridge body by pulling the screws off.; 4. Remove the two countersunk screws from the top plate.; 5. Insert the two M2,0 mm screws in the top plate.; 6. Mount the top plate on the cartridge body. Hold the top plate with screw-threads hanging down and turn the cartridge body 180 degrees. Mount from above.; 7. Mount the black screw in the top plate and tighten with appropriate force.; 8. Mount the cartridge on the tonearm using the enclosed tool.; 9. Mount the stylus with the stylus protection guard on the cartridge body.;