Product added to your wishlist! View wishlist
Sign in to see your saved products on any device
Product removed from your wishlist! View wishlist
Sign in to see your saved products on any device
Something went wrong. Please try again later.
Product is added to compare already. Please refresh the page.
Product is not found in compare. Please refresh the page.
5 Products already added. Please delete existing selection to add this.
Share this product
Malone MicroSport Trailer with V-Style Carriers for 2 Kayaks - 800 lbs MPG461GS
This product ad may change over time
ShareMalone MicroSport Trailer with V-Style Carriers for 2 Kayaks - 800 lbs MPG461GS
This heavy-duty trailer is great for hauling 2 kayaks or canoes. V-style carriers hold your boat securely in place. Durable saddles with rubber padding protect your boat's finish. Marine-grade trailer supports boats up to 20' long. Malone MicroSport trailer Galvanized steel frame 8' Reinforced tongue 65" Long coated steel square crossbars 12" Gal…
This heavy-duty trailer is great for hauling 2 kayaks or canoes. V-style carriers hold your boat securely in place. Durable saddles with rubber padding protect your boat's finish. Marine-grade trailer supports boats up to 20' long. Malone MicroSport trailer Galvanized steel frame 8' Reinforced tongue 65" Long coated steel square crossbars 12" Galvanized slotted wheels Pre-fitted chassis components Pre-wired electrical system with 4-pole flat trailer connector DOT approved lighting and bearings Overall dimensions: 164" long x 65" wide Designed for use with 2" hitch ball Product weight: 197 lbs Load capacity: 800 lbs 5-Year warranty Made in the USA Malone SeaWing kayak carriers Works with most recreational and sea kayaks Minimal lifting - position front of kayak on rear of vehicle, move to the rear of the kayak, and push it up to load Corrosion-proof, molded frame construction Low profile design for garage clearance Easy installation - no tools required Compatible with round, square, oval, aero, and elliptical crossbars Includes: 4 SeaWing V-style cradles for transporting 2 kayaks Universal fit Jawz mounting hardware 4 Cam style load straps with buckle protectors 2 Bow and stern safety tie-downs Overall dimensions (each): 27-1/2" long x 6" wide x 4-1/2" tall Lifetime warranty Spare tire with 12" galvanized wheel Lockable mounting bracket - lock not included Tire size: 4.80-12 DOT approved Ply rating: 2 Made in the USA S: 34822545BX, ball reciever, bike racks, kayak trailer, l11390, malone, Malone crossbars, malone kayak trailer, Trailer Safety Chains, yakima rack and roll Features: Heavy-duty trailer is great for hauling 2 kayaks or canoes V-style carriers with rubber saddles protect and secure your boats during transport Prevent movement while traveling on uneven or rough terrain Lockable mounting bracket carries a full-size spare tire on the trailer's tongue - lock sold separately Submersible LED tail lights and side markers are DOT-approved Galvanized steel construction resists corrosion - great for fresh and saltwater environments Trigger-latch-style coupler attaches to your vehicle's 2" hitch ball Included safety chains act as an emergency measure if coupler disconnects Leaf spring suspension absorbs road shock Assembly required - includes hardware, brackets, and wiring with 4-flat plug Licensing and registration paperwork included Made in the USA Specs: Trailer weight capacity: 800 lbs Crossbar weight capacity: 500 lbs Maximum boat weight capacity: 150 lbs per boat Maximum boat length: 20' long Crossbar dimensions: 78" long x 1-1/4" wide x 1-1/4" tall Crossbar spread: 44" - 63" Trailer dimensions: 13' 3" long x 78" wide x 30" tall Trailer tongue dimensions: 90" long x 3" tall x 2" wide Trailer weight: 240 lbs Maximum speed rating: 65 mph 5-Year warranty Limited lifetime warranty on MegaWing kayak carriers Coupler Specs: Ball size: 2" Pin hole diameter: 1/2" Height (from ground to bottom of coupler): 18" Tire and Wheel Specs: Wheel dimensions: 12" diameter x 4" wide Wheel bolt pattern: 5 on 4-1/2" Tire size: 4.80" x 12" Section width: 4" Outer diameter (when inflated): 21.3" Tire capacity: Load range: C Ply rating: 2 Speed Rating: 70 mph Note: Your local municipality requires you to register your trailer with the DMV. An etrailer representative will be reaching out to get information from you for the title. Lightweight Trailer is Perfect for Hauling Kayaks or Canoes This lightweight trailer with V-style cradles let you bring your favorite kayaks or canoes on your outdoor adventure. With a 7-1/2' long tongue, this trailer offers exceptional clearance during tight turns. The extended tongue also makes it easier to back up the trailer and prevent binding than trailers with shorter tongues. Durable V-style kayak carriers with rubber padding prevent scuffs, scratches, or damage to your boat during transport. The saddles stabilize your boat and prevent movement while traveling on uneven or rough terrain. Submersible LED Trailer Lights The DOT-approved tail lights on this trailer are fully submersible, so you don't have to worry about damaging the lights when loading and unloading your boat in water. Each tail light has brake, running light, and turn signal functions, as well as side marker lights and reflectors. In addition, these LED lights last longer, burn brighter, and require less power than incandescent bulbs. Plug-and-Play Trailer Wiring The wiring for this trailer has a simple plug-and-play design, so it doesn't require any cutting or splicing to install. As you assemble the trailer, route the main wiring harness through the trailer tongue and down towards the body of the trailer. Then plug the 4-wire end of the tail light harness into the main harness. Run the wires of the tail light harness along the sides
Description
This heavy-duty trailer is great for hauling 2 kayaks or canoes. V-style carriers hold your boat securely in place. Durable saddles with rubber padding protect your boat's finish. Marine-grade trailer supports boats up to 20' long. Malone MicroSport trailer Galvanized steel frame 8' Reinforced tongue 65" Long coated steel square crossbars 12" Galvanized slotted wheels Pre-fitted chassis components Pre-wired electrical system with 4-pole flat trailer connector DOT approved lighting and bearings Overall dimensions: 164" long x 65" wide Designed for use with 2" hitch ball Product weight: 197 lbs Load capacity: 800 lbs 5-Year warranty Made in the USA Malone SeaWing kayak carriers Works with most recreational and sea kayaks Minimal lifting - position front of kayak on rear of vehicle, move to the rear of the kayak, and push it up to load Corrosion-proof, molded frame construction Low profile design for garage clearance Easy installation - no tools required Compatible with round, square, oval, aero, and elliptical crossbars Includes: 4 SeaWing V-style cradles for transporting 2 kayaks Universal fit Jawz mounting hardware 4 Cam style load straps with buckle protectors 2 Bow and stern safety tie-downs Overall dimensions (each): 27-1/2" long x 6" wide x 4-1/2" tall Lifetime warranty Spare tire with 12" galvanized wheel Lockable mounting bracket - lock not included Tire size: 4.80-12 DOT approved Ply rating: 2 Made in the USA S: 34822545BX, ball reciever, bike racks, kayak trailer, l11390, malone, Malone crossbars, malone kayak trailer, Trailer Safety Chains, yakima rack and roll Features: Heavy-duty trailer is great for hauling 2 kayaks or canoes V-style carriers with rubber saddles protect and secure your boats during transport Prevent movement while traveling on uneven or rough terrain Lockable mounting bracket carries a full-size spare tire on the trailer's tongue - lock sold separately Submersible LED tail lights and side markers are DOT-approved Galvanized steel construction resists corrosion - great for fresh and saltwater environments Trigger-latch-style coupler attaches to your vehicle's 2" hitch ball Included safety chains act as an emergency measure if coupler disconnects Leaf spring suspension absorbs road shock Assembly required - includes hardware, brackets, and wiring with 4-flat plug Licensing and registration paperwork included Made in the USA Specs: Trailer weight capacity: 800 lbs Crossbar weight capacity: 500 lbs Maximum boat weight capacity: 150 lbs per boat Maximum boat length: 20' long Crossbar dimensions: 78" long x 1-1/4" wide x 1-1/4" tall Crossbar spread: 44" - 63" Trailer dimensions: 13' 3" long x 78" wide x 30" tall Trailer tongue dimensions: 90" long x 3" tall x 2" wide Trailer weight: 240 lbs Maximum speed rating: 65 mph 5-Year warranty Limited lifetime warranty on MegaWing kayak carriers Coupler Specs: Ball size: 2" Pin hole diameter: 1/2" Height (from ground to bottom of coupler): 18" Tire and Wheel Specs: Wheel dimensions: 12" diameter x 4" wide Wheel bolt pattern: 5 on 4-1/2" Tire size: 4.80" x 12" Section width: 4" Outer diameter (when inflated): 21.3" Tire capacity: Load range: C Ply rating: 2 Speed Rating: 70 mph Note: Your local municipality requires you to register your trailer with the DMV. An etrailer representative will be reaching out to get information from you for the title. Lightweight Trailer is Perfect for Hauling Kayaks or Canoes This lightweight trailer with V-style cradles let you bring your favorite kayaks or canoes on your outdoor adventure. With a 7-1/2' long tongue, this trailer offers exceptional clearance during tight turns. The extended tongue also makes it easier to back up the trailer and prevent binding than trailers with shorter tongues. Durable V-style kayak carriers with rubber padding prevent scuffs, scratches, or damage to your boat during transport. The saddles stabilize your boat and prevent movement while traveling on uneven or rough terrain. Submersible LED Trailer Lights The DOT-approved tail lights on this trailer are fully submersible, so you don't have to worry about damaging the lights when loading and unloading your boat in water. Each tail light has brake, running light, and turn signal functions, as well as side marker lights and reflectors. In addition, these LED lights last longer, burn brighter, and require less power than incandescent bulbs. Plug-and-Play Trailer Wiring The wiring for this trailer has a simple plug-and-play design, so it doesn't require any cutting or splicing to install. As you assemble the trailer, route the main wiring harness through the trailer tongue and down towards the body of the trailer. Then plug the 4-wire end of the tail light harness into the main harness. Run the wires of the tail light harness along the sides