Product added to your wishlist! View wishlist
Sign in to see your saved products on any device
Product removed from your wishlist! View wishlist
Sign in to see your saved products on any device
Something went wrong. Please try again later.
Product is added to compare already. Please refresh the page.
Product is not found in compare. Please refresh the page.
5 Products already added. Please delete existing selection to add this.
Share this product
Sikagard 664 Pigmented Mechanical Room Epoxy Coating, Gray, 4.5 Gallon Unit
This product ad may change over time
ShareSikagard 664 Pigmented Mechanical Room Epoxy Coating, Gray, 4.5 Gallon Unit
Sikagard 664 Pigmented Mechanical Room Epoxy Coating, Gray, 4.5 Gallon Unit Sikagard 664 is a pigmented, two-part low viscosity, self-priming, epoxy coating/binder used for smooth and textured coatings and/or broadcast overlayments. Use: Roller coat and self-leveling slurry for concrete and cement screeds with normal up to medium-heavy …
Sikagard 664 Pigmented Mechanical Room Epoxy Coating, Gray, 4.5 Gallon Unit Sikagard 664 is a pigmented, two-part low viscosity, self-priming, epoxy coating/binder used for smooth and textured coatings and/or broadcast overlayments. Use: Roller coat and self-leveling slurry for concrete and cement screeds with normal up to medium-heavy wear (e.g. storage, hallways, corridors and assembly halls, maintenance workshops, garages and loading ramps), or as a seal coat for broadcast systems. When used as a primer, Sikagard 664 can be considered when ≤ 4% moisture content by mass (pbw - part by weight) is measured on the concrete substrate with a Tramex CME/CMExpert type concrete moisture meter. Advantages: Good chemical and mechanical resistance. Easily applied with a brush, roller or squeegee. Glossy aesthetic finish. Slip-resistant surface possible. Durable, impermeable and seamless. Solvent-free, neutral odor. Low mixed viscosity
Description
Sikagard 664 Pigmented Mechanical Room Epoxy Coating, Gray, 4.5 Gallon Unit Sikagard 664 is a pigmented, two-part low viscosity, self-priming, epoxy coating/binder used for smooth and textured coatings and/or broadcast overlayments. Use: Roller coat and self-leveling slurry for concrete and cement screeds with normal up to medium-heavy wear (e.g. storage, hallways, corridors and assembly halls, maintenance workshops, garages and loading ramps), or as a seal coat for broadcast systems. When used as a primer, Sikagard 664 can be considered when ≤ 4% moisture content by mass (pbw - part by weight) is measured on the concrete substrate with a Tramex CME/CMExpert type concrete moisture meter. Advantages: Good chemical and mechanical resistance. Easily applied with a brush, roller or squeegee. Glossy aesthetic finish. Slip-resistant surface possible. Durable, impermeable and seamless. Solvent-free, neutral odor. Low mixed viscosity