Product added to your wishlist! View wishlist
Sign in to see your saved products on any device
Product removed from your wishlist! View wishlist
Sign in to see your saved products on any device
Something went wrong. Please try again later.
Product is added to compare already. Please refresh the page.
Product is not found in compare. Please refresh the page.
5 Products already added. Please delete existing selection to add this.
Share this product
Halo Track Lighting L80808SP9030P 3" LED Single Circuit Cylinder Track Fixture, 850 Lumens, Spot 90 CRI 3000K, 120V, White
This product ad may change over time
ShareHalo Track Lighting L80808SP9030P 3" LED Single Circuit Cylinder Track Fixture, 850 Lumens, Spot 90 CRI 3000K, 120V, White
High efficacy low profile track fixture ideal for accent and display lighting applications. Featuring die cast construction with a simple low profile design. These lampholders are perfect for those applications where performance is required from a discreet source. PRODUCT SPECIFICATIONSQuick Lock Adapter (Fixture to only be attached …
High efficacy low profile track fixture ideal for accent and display lighting applications. Featuring die cast construction with a simple low profile design. These lampholders are perfect for those applications where performance is required from a discreet source. PRODUCT SPECIFICATIONSQuick Lock Adapter (Fixture to only be attached to horizontally installed track systems.)Attaches electrically and mechanically anywhere along the track. Includes discrete locking tab that locks the luminaire on the track and allows for easy removal and repositioning.Heat SinkAluminum die-cast heat sink provides exceptional thermal management to yield 70% lumen maintenance after 50,000 hours of operation.LED Light EngineChip on board LED provides a uniform source with high efficiency and no pixilation. Available in 90 CRI minimum, R9 greater than 50 and color accuracy within 3 SDCM provide color accuracy and uniformity.OpticsConfigurable optics allow for the reflectors to be changed in the field to adjust to the current lighting need. Available in spot, flood and narrow flood distributions.MediaPrecision designed trim ring contains unique teeth locking mechanism, and can accept up to 2 pieces of standard media. The 3" diameter fixture accepts PAR 20 standard media. The 4" diameter fixture accepts PAR 30 standard media.Luminaire ArmArm allows the lamp housing tilt to adjust ±180º vertically and ±350º horizontally. This enables a clean look while providing full aiming capabilities.Dimming TRIAC, ELV or PhasecutDesigned for continuous dimming capability to nominally 5% with many 120V Leading Edge (LE) and Trailing Edge (TE) Phase Control Dimmers. (Dimmers with low end trim adjustment offer greater assurance of achieving 5% level.)WarrantyFive year limited warrantyDrivers3" fixtures (12W and 21W) contain integral 120V, 50/60 Hz constant current driver that provides noise free operation. 4" fixtures (35W) contain 120V 50/60Hz constant current driver that provides noise free operation.CompliancecULus listed / certified for use with Halo Single Circuit Power- Trac and Global TEK/HTEK track(See Footnote #1 below Ordering Information). NSF non-food zone compliant. EMI/RFI emissions per FCC 47CFR Part 15 Class B consumer limits. Contains no mercury or lead and RoHS compliant. Photometric testing in accordance with IES LM-79-08.Lumen maintenance projections in accordance with IES LM-80-08 and TM-21-11. . By Halo Lighting
Description
High efficacy low profile track fixture ideal for accent and display lighting applications. Featuring die cast construction with a simple low profile design. These lampholders are perfect for those applications where performance is required from a discreet source. PRODUCT SPECIFICATIONSQuick Lock Adapter (Fixture to only be attached to horizontally installed track systems.)Attaches electrically and mechanically anywhere along the track. Includes discrete locking tab that locks the luminaire on the track and allows for easy removal and repositioning.Heat SinkAluminum die-cast heat sink provides exceptional thermal management to yield 70% lumen maintenance after 50,000 hours of operation.LED Light EngineChip on board LED provides a uniform source with high efficiency and no pixilation. Available in 90 CRI minimum, R9 greater than 50 and color accuracy within 3 SDCM provide color accuracy and uniformity.OpticsConfigurable optics allow for the reflectors to be changed in the field to adjust to the current lighting need. Available in spot, flood and narrow flood distributions.MediaPrecision designed trim ring contains unique teeth locking mechanism, and can accept up to 2 pieces of standard media. The 3" diameter fixture accepts PAR 20 standard media. The 4" diameter fixture accepts PAR 30 standard media.Luminaire ArmArm allows the lamp housing tilt to adjust ±180º vertically and ±350º horizontally. This enables a clean look while providing full aiming capabilities.Dimming TRIAC, ELV or PhasecutDesigned for continuous dimming capability to nominally 5% with many 120V Leading Edge (LE) and Trailing Edge (TE) Phase Control Dimmers. (Dimmers with low end trim adjustment offer greater assurance of achieving 5% level.)WarrantyFive year limited warrantyDrivers3" fixtures (12W and 21W) contain integral 120V, 50/60 Hz constant current driver that provides noise free operation. 4" fixtures (35W) contain 120V 50/60Hz constant current driver that provides noise free operation.CompliancecULus listed / certified for use with Halo Single Circuit Power- Trac and Global TEK/HTEK track(See Footnote #1 below Ordering Information). NSF non-food zone compliant. EMI/RFI emissions per FCC 47CFR Part 15 Class B consumer limits. Contains no mercury or lead and RoHS compliant. Photometric testing in accordance with IES LM-79-08.Lumen maintenance projections in accordance with IES LM-80-08 and TM-21-11. . By Halo Lighting