Product added to your wishlist! View wishlist
Sign in to see your saved products on any device
Product removed from your wishlist! View wishlist
Sign in to see your saved products on any device
Something went wrong. Please try again later.
Product is added to compare already. Please refresh the page.
Product is not found in compare. Please refresh the page.
5 Products already added. Please delete existing selection to add this.
Share
Jet Drill Press: Belt, Variable, 50 RPM ? 2,000 RPM, 230V AC /Three-Phase, 19 3/4 in Swing, 1.5 hp Model: 354250
Drill Press, Primary Material Application Metal, Power Down Feed Included Yes, Drill Press Type Floor Stand, Drill Press Application Drilling, Tapping, Speed Control Variable, Speed Adjustment Clutch, Swing 19 3/4 in, Spindle-to-Column Distance 26 1/2 in, Horsepower 1.5 hp, Voltage 230V AC, Spindle Taper MT3, Number of Speeds 3, C…
Drill Press, Primary Material Application Metal, Power Down Feed Included Yes, Drill Press Type Floor Stand, Drill Press Application Drilling, Tapping, Speed Control Variable, Speed Adjustment Clutch, Swing 19 3/4 in, Spindle-to-Column Distance 26 1/2 in, Horsepower 1.5 hp, Voltage 230V AC, Spindle Taper MT3, Number of Speeds 3, Chuck Size 1/2 in, Chuck Style Keyed, Guard Included Yes, Quill Diameter 2 5/32 in, Tapping Capacity in Steel 3/4 in, Drilling Capacity in Steel 1 1/8 in
Description
Drill Press, Primary Material Application Metal, Power Down Feed Included Yes, Drill Press Type Floor Stand, Drill Press Application Drilling, Tapping, Speed Control Variable, Speed Adjustment Clutch, Swing 19 3/4 in, Spindle-to-Column Distance 26 1/2 in, Horsepower 1.5 hp, Voltage 230V AC, Spindle Taper MT3, Number of Speeds 3, Chuck Size 1/2 in, Chuck Style Keyed, Guard Included Yes, Quill Diameter 2 5/32 in, Tapping Capacity in Steel 3/4 in, Drilling Capacity in Steel 1 1/8 in
Specifications
Voltage | 230v Ac |
Chuck Type | Belt |
Speed Settings | Variable |
Unspsc | 0 |
Drilling Capacity In Cast Iron | 1-1/4 In |
Drilling Capacity In Steel | 1-1/8 In |
Horsepower | 1.5 Hp |
Chuck Size | 1/2 In |
Table Load Capacity | 110 Lb |
Table Length | 16-1/2 In |
Base Length | 17-3/4 In |
Swing | 19-3/4 In |
Number Of T-slots | 2 |
Maximum Spindle Speed | 2,000 Rpm |
Motor Voltage | 230v Ac ; Three-phase |
Base Width | 25-1/2 In |
Tapping Capacity In Steel | 3/4 In |
Column Diameter | 4 In |
Current | 4.6a |
Tool Weight | 477 Lb |
Maximum Spindle-to-base Height | 48-7/8 In |
Spindle Travel | 5 In |
Minimum Spindle Speed | 50 Rpm |
Cord Length | 6 Ft |
Maximum Overall Height | 70-3/8 In |
Standards | Csa/cus Certified |
Drill Press Type | Floor Stand |
Application | Heavy Drilling |
Brand | Jet |
Chuck Style | Keyed |